|
Post by Admin on Nov 6, 2019 14:31:05 GMT -5
Windows - Configuration & Calibration for Touch Displays Windows 10: Once all the components are properly connected and powered on, it is necessary to let the operating system know which of the displays in your configuration has touch capability. Tap the Windows Start button, type Control Panel and press Enter You may want to change the view to Large/Small icons Select Tablet PC Settings Figure 1: View and Tablet PC Settings Figure 2: Configuration and Calibration Once Setup is selected, all the connected screens will go white and one of the screens will display “Touch this screen to identify it as the touchscreen” and “If this is not the Tablet PC screen, press Enter to move to the next screen. To close the tool press Esc.” to move to the next display. So, if the screen with the above message is displayed, either tap the screen or tap the Enter key until the correct display is selected. Once selected click on Calibrate to be guided through the calibration process and complete the setup. Figure 2: Touch Screen Selection At this point, your system should be working and setup is complete.
|
|